Rebuilt Meyer E-60 Power Angle Snow Plow Pump (replaces E46 E47 E57)

Description

Completely rebuilt Meyer E-60 snow plow pump. All new o-rings. New Ram. (ball honed cylinder). New dual stud starter motor. New A coil. New B coil. New C coil. New crossover seal kit and spring. New elbows and pin type couplers. New vent plug. New hardware kit including ground bolt. Unit was bead blasted, primed, painted and new decals. Pump in the picture is the actual pump you will receive. Tested under load on a test stand and adjusted. Works great. Some chips, scratches, runs and or flaws in the paint. Drained of oil for shipping. Not responsible for shipping damage. Shipping insurance available at buyers expense. Please ask for insurance in advance. Sold as is. Thank you.
Some things to remember when buying a “refurbished” or “rebuilt” pump. Avoid any pumps that only give you a vague description of what’s been done to it. (Example “any defective components replaced” know exactly what your new pump is getting) Always make sure your new pump is getting a new lift ram (any defects in a used ram will allow water in making your new pump freeze up when you need it most). I’d think twice about buying a pump that was assembled using Teflon plumbers tape to seal the joints. That stuff breaks down over time and clogs your pump up. Also make sure you’re getting new couplers, a new crossover spring and a new starter motor. Don’t put your trust in to 30 year old parts in a blizzard. Thanks for looking