ENTTEC ODE 70405 Open ArtNet DMX Ethernet MK2 RDM Lighting Controller

Description

ENTTEC ODE Mk2 1-Port Open DMX Ethernet Gateway
Ethernet/DMX-512 Interface
The Easy Way to Control Your Lighting Remotely
The ENTTEC ODE Mk2 is a feature-packed Ethernet/DMX interface with industry-standard performance. It supports multiple protocols and connects to your existing router with ease. It supports either LTP or HTP merging for up to two sources, as well as RDM over Art-Net. Choose Input mode to receive DMX and send it over Ethernet, or Output mode to send DMX. And everything is configurable via an easy-to-use web-based interface. The OpenDMX Ethernet Mk2 is the easy way to control your lighting remotely.
The Swiss army knife of lighting interfaces
The ODE Mk2 supports an array of protocols, including Art-Net 1/2/3, ACN, sACN, and ESP. It can transmit Remote Device Management (RDM) over Art-Net and supports LTP or HTP merging for up to two sources. You can also choose between Input mode (receives DMX and sends over Ethernet) or Output mode (sends DMX). Whatever it is that you're trying to accomplish, chances are the ODE Mk2 can do it.
Computer Not Included!
Ready to connect and easy to set up
The ODE Mk2 uses DHCP IP addressing, so all you have to do is connect it to your existing router and any supported software will find it. Setup is a breeze using your browser and an intuitive web-based configuration — just click a few buttons, and you're ready to go. The ODE Mk2 is compatible with a wide range of controller apps for Mac, Windows, iOS, and Android devices.
Compatible Apps:
Art-Net Controller
(Android)
ArtNetDmxRemote
(iOS)
Aurora DMX
(Android)
Chameleon
(Mac)
D-PRO
(Mac/Windows)
ELM ENTTEC LED Mapper
(Windows)
Freestyler
(Windows)
Jinx! LED Matrix Control
(Windows)
LXConsole
(Mac)
LightFactory
(Windows)
LightForge
(Windows)
LightJams
(Windows)
Lightkey
(Mac)
Luminair
(iOS)
MadMapper
(Mac)
QLC+
(Mac/Windows/Linux)
Run The Show
(iOS)
TouchDesigner
(Windows)
Vibrio
(iOS)
VenueMagic
(Windows)
ENTTEC ODE Mk2 Features:
Ethernet/DMX-512 interface with industry-standard performance
Supports multiple protocols, including Art-Net 1/2/3, ACN, sACN, and ESP
Supports either LTP or HTP merging for up to two sources, as well as RDM over Art-Net
Input mode receives DMX and sends it over Ethernet, while Output mode sends DMX
Uses DHCP IP addressing for seamless connection to your existing router
Everything is configurable via an easy-to-use web-based interface
Compatible with a wide range of controller apps for Mac, Windows, iOS, and Android devices
Specification
Detail
Connectivity
5-pin DMX in/out, 1 x Ethernet 10/100
Compatibility
Art-Net 1/2/3, Streaming ACN/sACN, ESP protocols
Power Source
7V DC power supply