-40%
700W DJ event party Cold Spark Firework Machine Stage Effect DMX Machine
$ 198.52
- Description
- Size Guide
Description
Product DescriptionThe Spark machine produces a fantastic,non-hazardous effect that look like traditional fireworks orpyrotechnics,adopting brand-new control system and standard DMX control to realize multiple stagespecial effects. Lt thoroughiy changed the drawbacks on traditional cold fireworks such as danger caused by gunpowder,environmental pollution,restricted for use etc. The duration and height of the effect can be varied throughout a display,with sequences of dancing sparks created to entertain audiences
Feature
2pcs a set, high cost effective.
Standard DMX 512 control signal, connected to Max. 6 controlled machine.
2 control channel: frist channel for pre-heat function, second channel for 3-16FT spark height adjustable.
1-10 level spark height adjustable by DMX.
Convenient remote controller.
Over-heat protection for safety use.
Emergency stop, Ti composit powder cleaning function.
Double DMX port, double AC power port.
Low noise, no flame & fire, more safe than traditional products.
Easy and quick installation.
Come with 2 year warranty, CE & Rohs approved.
Specifications
Material: Aluminum Alloy
Input Voltage: 110V
Frequency: 700W
Spark Height: 1-5M / 3-16FT(Adjustable)
Port: DMX Port(Dual)
Max. Connecting Machine: 6
Working Temperature: -10℃ to 50℃
Product Weight: 9.5kg / 21LBS
Product Size: 31 X 24.55 X 24.5cm / 12.2 X 9.64 X 9.64
Operation
1. Preparing For Operation
After checking that all the parts are intact and complete, position the machine on flat.
Fill the consumable into feed port when power off
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage.
Turn on the machine, it will immediately start heating up.
2. On-device Manual Control
To access the control panel functions, use the four buttons located underneath the LCD display.
Button
Function
Switch menu pages to select a function
Inceases the numeric value of current function
Decreases the numeric value of current function
Switch between current menu page and standby page
Menu Page
Control Board
Description
Heating/Ready To Work
Heating Up/Finish heating up, ready to work
DMX512 Add
Set DMX strating address
Volume Out 100%
Set the Spark height
Remote Add
Set OFF the remote functions and set the remote address
Manual Test
Press Enter to trigger spark output manually
Tip Over
Set ON/OFF the tip over functions
Set Heater
Manually set ON/OFF the heater
4. DMX Channel And Values
Channel
Function
1
0 Spark off, 1-255, Spark higher when the value bigger
2
0-249 Heat-up off 250-255 Heat-up on
5. Indicators And Updates
UPDATE
Data update button
DMX
Lights when receiving a normal signal DMX
READY
When the light is on, The machine is heated and ready to work
ERROR/UPDATE
When the light is on, The device is faulty or the data is updated
HEAT
When the light is on, The machine is heating
UPDATE
Data update interface
6. Wireless Controller
Button
Features
ON
Heat-up on
OFF
Heat-up off
5S
Spark work 5s
10S
Spark work 10s
20S
Spark work 20s
Addr1
The remote address 1 spark
Addr2
The remote address 2 spark
Addr3
The remote address 3 spark
High
Spark height level biggest
Mid
Spark height level middle
Low
Spark height level lowest
Stop
Spark stop
6. Fill Spark Seed
Fill the comsumable into the feed port, NOT into the output nozzle when power off.
Close the lid securely after filling.
The capacity of storage bin is 200g.
7. TECHNICAL INFORMATION
1). Precaution For Use
After use, should observe whether there are nodules in the nozzle. If yes, it needs to be clean up, otherwise it will affect the spray effect and even damage the machine.
2). Machine storage
Before storing the machine, empty the storage bin, clean it as described in the "Maintenance" section.
Remove the power cord from mains power, and allow unit tocool down. Empty the storage bin through feed port by inverting the machine.
Keep the machine in dry cool place.
Package Content
Cold Spark Machine
DMX Signal Cable
Power Line
Remote Control
1 X User Manual
Notes:We won't ship to VIRGIN ISLANDS, PUERTO RICO, ALASKA, HAWAII and GUAM for free. We need to calculate the shipping fee additionally. BUY IT, We will contact you and calculate for you.