4X H7 4 Side Headlight Conversion Kit Hi/Low Beam Combo Super Bright White 6000K

Description

Note
When you install , it may occur this:
Neither side lighting up? Both sides flicker, flash, or work inconsistantly. Please don't worry. the lights you bought is good,
you just need extra canbus to fix this!!! But we don't sell canbus /decoder , You need to buy it from somewhere else！！！！
2. This  H7  LED Bulb Fits on Normal Type Only.
If your Factory halogen bulb H7 Comes with a retainer clip ,which require the adapter to install LED bulb,you need to buy the extra the retainer clips for the H7 houseing scoket.Please kindly note that,thanks
Specifications:
Plug Type:
H7,  (can be for High Beam or Low beam or fog light, depends on your car model!)
LED Quantity(each bulb): 4pcs* COB chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP68 rated water and dust seal,over 50000hrs lifetime
Beam Angle: 360 Degree, 4-Side COB LED
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: high beam + low beam headlight combo
Features:
Our Advantanges: 4 Sides; Super Bright ; Mini Size ; Easy Install; Nearly 1:1 to your original light
1.100% New and Never Used
2. Super bright COB chip(USA),360 degree clear beam no blind zone
3. IP Rate: IP68
4.Built-in Smart Efficient Cooling System Fast Heat Dissipation
5. Built-in constant current CPU,instant full brightness without start-up relay
6.High quality Aluminum heat dissipation ensures the secure temperature range
9.Low Power Consumption than Halogen bulb, Energy Saving
10.Low Voltage Protection, High Precision Constant Current driver Chip
11.Shakeproof and Long lasting up to 50,000 Hours.
12. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
13. All-in-one heat conductionkeep the light bulb in appropriate working temperature
14. Easy installation
Package Content:
4x H7 LED Light Bulbs
Automotive LED headlight advantages:
LED lights than traditional halogen energy, more power.
Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 8% .
Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs